|
|
|
M280 Monoblock Amplifiers
|
| |
|
Built Around KT88 Tubes: |
| |
|
The M280 is a class A ultra-linear monoblock power amplifiers with the use of two matched KT88 tubes per channel. It is the
monoblock version of our M50 KT88 power amplifier. The M280 is capable to deliver 50 watts of power per
channel. To get the most out of the design, we used the best caps and resistors we could ever find. The custom wound output
and power transformers were specially designed to extend the bass and highs. Just as important, the military grade epoxy
circuit boards are designed to minimize component interaction. You will also see the care we took by looking inside.
No rat's nest here, neatly laid out Teflon wires, carefully thought through grounding paths, all done in the best traditions
of American craftsmanship.
|
| |
| Image Gallery
|
|
SPECIFICATIONS
|
|
Rated Power Output: |
50 Watts RMS |
|
Input Sensitivity: |
1.2 Volts for full output |
|
Input Impedance: |
100,000 Ohms |
|
Frequency Response: |
+/- 1dB from 10 Hz to 85,000 Hz |
|
Total Harmonic Distortion: |
< 0.4% |
|
Signal-to-Noise Ratio: |
-95 dB below 1 Watt |
|
Damping Factor: |
14 |
|
Power Consumption: |
220 Watts (true RMS) |
|
Output Impedance: |
4, 8 Ohm |
|
Tube Complement (per monoblock): |
2 x KT88
2 x 6SN7
|
|
Dimensions (per monoblock): |
10" W x 17.5" D x 8" H |
|
Net Weight (per monoblock): |
35 lbs. |
|
Warranty: |
2 Years Parts and Labor |
|
Specifications subject to change without notice. |
|
